background image

Product Specific Applications

Personal Fall Arrest:

 Armadillo may be used to support a MAXIMUM 1 Personal

Fall Arrest System (PFAS) for use in Fall Arrest applications. Structure must
withstand loads applied in the directions permitted by the system of at least
5,000 lbs. Maximum free fall is 2‘. Applicable D-ring: Dorsal.

Restraint:

 Armadillo may be used in Restraint applications. Restraint systems

prevent workers from reaching the leading edge of a fall hazard. Always account
for fully deployed length of lanyard/SRL. Structure must withstand loads applied
in the directions permitted by the system of at least 1,000 lbs. No free fall is
permitted. Restraint systems may only be used on surfaces with slopes up to 4/12
(vertical/horizontal). Applicable D-rings: Dorsal, Chest, Side, Shoulder.

!

WARNING

Use of equipment in unintended applications may result in serious

injury or death. Maximum 1 attachment per connection point.

For all applications: worker weight capacity range

(including all clothing, tools, and equipment) is 130-310 lbs.,

or up to 420 lbs. if used in combination with

equipment explicitly certified for such use.

   

G

ua

rd

ia

Fa

ll 

Pr

ot

ec

tio

  6

30

S.

 2

31

st

 S

t.

, K

en

t,

 W

A

 9

80

32

   

   

 p

ho

ne

: (

80

0)

 4

66

-6

38

 f

ax

: (

80

0)

 6

70

-7

89

   

  w

w

w

.g

ua

rd

ia

nf

al

l.c

om

6

Summary of Contents for 00245

















Reviews: