background image

Labels

   

G

ua

rd

ia

Fa

ll 

Pr

ot

ec

tio

  6

30

S.

 2

31

st

 S

t.

, K

en

t,

 W

A

 9

80

32

   

   

 p

ho

ne

: (

80

0)

 4

66

-6

38

 f

ax

: (

80

0)

 6

70

-7

89

   

  w

w

w

.g

ua

rd

ia

nf

al

l.c

om

12

For reference only. Background to be white.
Date of manufacture to be: month/year.

DO NO

T REM

O

VE LABEL

If equipmen

t f

ails inspection

IMMEDIA

TEL

Y REM

O

VE FR

O

M SERVICE

User must inspect prior to EACH use. Competent Person must complete
formal inspection every 6 months. Competent Person to inspect and initial.

INSPE

CTION GRID

Date of First Use: __________________. 

Product lifetime is indefinite as

long as equipment passes pre-use and Competent Person inspections.

YR

J F M A M J

J A S O N D

20____

20____

20____
20____

20____

Triple-Locking

carabiner attached to

anchorage connector

(4) Casters in

contact with

roof surface

6. Attach Triple-Locking Carabiner to selected anchorage connector. Ensure all (4) Casters will
remain in contact with roof surface at all times.

!

WARNING

Armadillo

Part #: 00245

Prior to use, read and understand all manufacturer’s
instructions provided with equipment at time of
shipment from manufacturer.

Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2012 regulations.

Capacity range (including all equipment): 130-310 lbs.,
or up to 420 lbs. if used with equipment explicitly
certified for such use.

All connections must be selected and deemed compatible
with the Armadillo by a Competent Person.

www.guardianfall.com

1-800-466-6385

6305 S. 231st St., Kent, WA 98032

Date of Manufacture:

Installation and Use:

1. Install compatible SRL. Remove Locking Bars and Hitch Pins;
Insert SRL into carriage with SRL attachment point facing in
same direction as Triple-Locking Carabiner; Insert Large Locking
Bar through SRL attachment point; Insert Small Locking Bar
over SRL body; Secure both Locking Bars with Hitch Pins.

2. Attach SRL Triple-Locking Carabiner to compatible anchorage
connector.

3. Attach SRL connector to applicable harness D-ring.

All (4) Casters MUST remain in contact
with work surface at all times.

Materials: Aluminum, stainless steel, zinc-plated steel,
& rubber.

NOT a stand-alone anchor.

90125

(Rev. B)

Summary of Contents for 00245

















Reviews: