background image

18

IN NO EVENT SHALL GUARDAIR CORPORATION BE LIABLE TO THE PURCHASER 
OR ANY USER OF THE AIRSPADE, OR TO ANY OTHER PERSON OR ENTITY, FOR  
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES INCLUDING THE COST OF 
PROVIDING SUBSTITUTE EQUIPMENT DURING PERIODS OF MALFUNCTION OR NON-
USE AND DAMAGES FOR DELAY. THE WARRANTIES AND REMEDIES SET FORTH 
ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES AND REMEDIES  AVAILABLE.  
GUARDAIR CORPORATION SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL OTHER 
WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY. 

The UTILITY AIRSPADE Series 4000 is warranted by GUARDAIR CORPORATION  
(GUARDAIR) against defects in material and workmanship for a period of one year. 
Defective units will be replaced or repaired at the option of GUARDAIR. The 
warranty period begins at the date of shipment of the tool from GUARDAIR or 
from GUARDAIR’S authorized distributor.

This warranty shall not be in effect if the tool is subject to misuse, negligence,  
or accident, or if it is configured, or used in any manner inconsistent with the  
directions set forth in this operator’s manual. Wear and tear from normal use is  
not covered under this warranty.

Any and all claims for warranty consideration must be coordinated through 
GUARDAIR.  Do not return the unit or parts without prior authorization. Upon obtaining 
authorization, returned units or parts must be postage prepaid.

The purchaser’s recovery for damages resulting from any and all causes whatso-
ever, including, but not limited to, breach of contract, breach of warranty, negligence 
or strict product liability will be limited to the replacement of the components of the 
tool with respect to which losses or damages are claimed, provided that GUARDAIR 
has been notified of any alleged defect within the warranty period. 

LIMITED WARRANTY

Limited Warranty 

HT311-2_UAS4000-OpsMan.indd   19

HT311-2_UAS4000-OpsMan.indd   19

3/13/20   5:41 PM

3/13/20   5:41 PM

Summary of Contents for ASU4105G4





















Reviews: