GTT Canoga C924 Series, Installation Manual

Page: 22 / 81

Canoga™ Vehicle Detectors
Canoga™ C924X Series Installation Manual
16 – Vehicle Detector Setup & Configuration
Table 5-1 C924X Settings
C924X Settings by Channel
# Setting
Channel 1 Channel 2 Channel 3 Channel 4
Now Fac Def Now Fac Def Now Fac Def Now Fac Def
1 Sensor Type Lp Lp Lp Lp Lp Lp Lp Lp
2 Sensitivity 3 4 3 4 3 4 3 4
3 Sensitivity Mode Pres Pres Pres Pres Pres Pres Pres Pres
4 Frequency H MH MH MH ML MH L MH
5 Threshold Multiplier 2 2 2 2 2 2 2 2
6 Slope Timer 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15
7 Slope Divisor 2 2 2 2 2 2 2 2
8 Bridge Time 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
9
Long Loop Counting Mode
(only if Sensor Type =
Loop)
Dis. Dis. Dis. Dis. Dis. Dis. Dis. Dis.
10 Delay Timing 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
11 Extension Timing 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
12 Direction Detection Dis. Dis. Dis. Dis. Dis. Dis. Dis. Dis.
13 Directional Detection Call
Duration
1 1 1 1 1 1 1 1
14 Background Adapt
(Loop only)
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
15 Recovery Mode (Loop Only) Fast Nor. Fast Nor. Fast Nor. Fast Nor.
16 Background Adapt
(Microloop)
.2031 .2031 .2031 .2031 .2031 .2031 .2031 .2031
17 Wash Delay Time 600 240 600 240 600 240 600 240
18 Wash Adapt Rate Ins. 0.5 Ins. 0.5 Ins. 0.5 Ins. 0.5
19 Loop Description Blank X Blank X Blank X Blank X
20 Loop Type Unk. X Unk. X Unk. X Unk. X
21 Field Length 8.0 X 8.0 X 8.0 X 8.0 X
22 Binning En. Dis. En. Dis. En. Dis. En. Dis.
Lp = Loop; Fac = Factory; Def = Hardware Default; Pres = Presence; En. = Enabled; Dis. = Disabled; Nor. = Normal; X = Don’t Care; Unk =
Unknown; Ins. = Instant