GTT Canoga C924 Series, Installation Manual

Page: 10 / 81

Canoga™ Vehicle Detectors
Canoga™ C924X Series Installation Manual
4 – Safety
2.4.2 Work Zone Traffic Control
Proper control of vehicle traffic is important during many procedures. When necessary, we
recommend that you have people trained in manual traffic control, such as police officers, assist you.
When you install devices that require you to position vehicles, equipment, or people in or near the
roadway it is important that you use appropriate work zone traffic control techniques, equipment, and
procedures. Sometimes you may have to work on or near the roadway and these same techniques,
equipment, and procedures should be used for your protection.
If you are unsure of which procedures are recommended or appropriate for the job, ask your supervisor
or foreman.
2.4.3 Electric Shock
The possibility of electrical shock exists when installing Canoga™ C924X vehicle detectors if they are
not installed properly. Follow proper work procedures and read and understand the safety messages in
this manual.
As a trained installer of electrical equipment, you are aware of the dangers associated with
installation of electrical devices. Always be sure that the power to the equipment, and all associated
equipment, is off before beginning any procedure. Use the equipment, techniques, and procedures
that you learned during your training or apprenticeship or other electrical industry recognized safety
procedures.
If you are unsure of which procedures are recommended for the job, ask your supervisor or foreman.
2.5 Disposal of Device
Please dispose of the device in accordance with all local government laws and regulations.
2.6 Regulatory Requirements Conformance
Canoga C924X vehicle detectors meet US FCC Part 15, Subpart B and Canada ICES-003, Issue 5: 2012
requirements.