11
Carrying out function test
• Position the RaceChip and the wiring harness safely in the engine bay. Do not fi x
anything in place yet.
• Switch the ignition on
DO NOT
start the engine
• Check for the following:
- Control lights on the dashboard light up and go out as normal
- The Power ON and Bluetooth indicators light up on the Digital User Interface of
your RaceChip (see
Overview of the RaceChip
)
• If all the above happens, you can start the engine. It should start as normal and should
react to the throttle when idling
• Switch off the engine and ignition
3 Installation
Step 5 of 8 – Connecting the RaceChip and fi rst function test
• If your car will not start as normal, please refer to
Trouble Shooting
for hints and tips
• Our Customer Service is of course always ready to help. See
Contact
for details
• If the Digital User Interface lit up as soon as it was connected, this means that there
was still power in the system during the installation.
• In some cases, this can lead to an error message during the fi rst function test. Please
refer to
Trouble Shooting
for a solution
Disconnect the deactivation
plug from the wiring harness
Connect the RaceChip
1
2
3
