Equipment Supplied
Qty 1 HCH-P7101-Retro charger PCB
Qty 1 HCH-P7101-Retro charger power adaptor
Qty 1 GTS label bottom label
Qty 1 GTS label front label
Qty 1 GTS label back label
Tools Required
Qty 1 M/A-COM BML 161 78/20 or CH-104560-026 charger
Qty 1 Security star screw driver (Tamper Resistant Torx size T10H)
Qty 1 Phillips screwdriver
Notice
Always wear ESD (electrostatic discharge) protection during the assembly process.
Components are ESD sensitive!
Assembly Procedure
1. Turn over the charger and unscrew the six screws on the bottom (See picture 1 and 2).
Keep the screws aside for reuse.
Note: Use security star screw driver (Tamper Resistant Torx size T10H) to remove screws in picture 1
2. Pull out the cup/sleeve and leave aside and remove the charger top housing
(See pictures 3 and 4).
3. Unplug the LED connector from OEM PCB and leave the top housing aside.
(See pictures 5 and 6).
HCH-P7101-Retro Installation guide
Picture 1
Picture 2
Picture 3
