4. Unscrew the two screws on the PCB and the one on power adapter. (See pictures 7 and 8).
5. Remove the OEM PCB and place into the ESD bag. (See pictures 9 and 10).
6. If the charger is CH-104560-026, unscrew the four screws on the cup/sleeve PCB and
remove/cut out R1 on the cup/sleeve PCB. Make sure the J1 jumper is at 2-3
position. See picture 11. Assemble the cup/sleeve PCB back to the cup/sleeve.
Picture 4
Picture 5
Picture 6
Picture 7
Picture 8
Picture 10
Picture 11
Picture 9
