M i g h t y M u l e E Z G a t e s
9
Driveway Width
Single Gate Size
Distance Between Center of Gate Posts
Sanibel
St. Augustine Biscayne
Up to 9' 6" (114")
10’ (120")
10' 9" (129")
10' 6" (126")
10' 9" (129")
9' 7" - 11' 9" (115" - 141")
12' (144")
12' 9" (153")
12' 9" (153")
12' 9" (153")
Distance Between Posts Measured Center to Center
4” Gap
for Hinges
2” Gap
Leading Edge
Clearance
4”
Post
4”
Post
Horizontal Dimensions
Vertical Dimensions
The following guidelines will help you install your gate properly resulting in smooth, trouble-free operation:
Distance between center of gate posts:
This measurement will show you where you need to center your posts and dig
the holes. Following the chart below, align and center your gate posts utilizing the yellow "E-Z Line-up" Bolts. It illustrates the
required clearance needed for the gate hinge (approx. 4” clearance) and gate leading edge (approx. 2” clearance), measured
from the center of the posts.
Precise measurement is crucial to successful installation of your gate.
Gate post height:
This measurement is the same for all gate models and is designed for a minimum of 4” clearance from the
bottom of the gate and the highest crowning point on the driveway or curb.
Depth of post hole:
Approximately 36" which will give the gate 4" clearance above the driveway at the flatest part
Single Gate Installation Overview
60”
4”
4”
60”
36”
36”
Depth of
Post Hole
Depth of
Post Hole
Post spaced at least
4” from driveway
Post spaced at least
4” from driveway
Single Gate Panel
Yellow “E-Z LINE-UP” Bolts
Driveway
4” Square Post
12”x 24” Hole
(Approximately)
12”x 24” Hole
(Approximately)
4”
4” Space for Hinge
2” Space for
Leading Edge
4” Square Post
4”
