10
M i g h t y M u l e E Z G a t e s
Driveway Width
Dual Gate Size
Distance Between Center of Gate Posts
Sanibel St. Augustine Biscayne
Up to 11' 6" (138")
12’ (144")
13' 1" (157")
12' 6" (150")
13' 1" (157")
11' 7" - 13' 11" (139" - 167")
14' (168")
15' 1" (181")
14' 11" (179")
15' 1" (181")
13' 11" - 16' 1" (167" - 193")
16' (192")
17' 1" (205")
17' 3" (207")
17' 1" (205")
Dual Gate Installation Overview
Distance Between Posts Measured Center to Center
4” Gap
for Hinges
4” Gap
for Hinges
4”
Post
4”
Post
2” Space Between Gate Panels
The following guidelines will help you install your gate properly resulting in smooth, trouble-free operation:
Distance between center of gate posts:
This measurement will show you where you need to center your posts and dig
the holes for your posts.
Following the chart below, align and center your gate posts utilizing the yellow "E-Z Line-up" Bolts.
It illustrates the required clearance needed for the gate hinge (approx. 4” clearance), and the space between the two gate
panels (approx. 2" clearance) measured from the center of the posts.
Precise measurement is crucial to successful
installation of your gate.
Gate post height:
This measurement is the same for all gate models and is designed for a minimum of 4” clearance from the
bottom of the gate and the highest crowning point on the driveway or curb.
Depth of post hole:
Approximately 36" which will give the gate 4" clearance above the driveway at the highest part
60”
4”
4”
60”
36”
36”
Depth of
Post Hole
Depth of
Post Hole
Horizontal Dimensions
Vertical Dimensions
Post spaced at least
4” from driveway
Post spaced at least
4” from driveway
Dual Gate Panel
2” Clearance
Between Gate Panels
Driveway
4” Space for Hinges
4” Space for Hinges
4”
4”
Yellow “E-Z LINE-UP” Bolts
4” Square Post
12”x 24” Hole
(Approximately)
12”x 24” Hole
(Approximately)
4” Square Post
