background image

rev. 10-04-10

FCC WARNING: Changes or modifications to this unit not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in particular installations. If 
this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:  • Reorient or replace the receiver 
antenna. • Increase the separation between the equipment and the receiver. • Connect the 
equipment into an outlet on a circuit different from that to which the receiver is connected. • 
Consult the dealer or an experienced radio/TV technician for help.

This product and any accessory you purchase should only be installed on a gate opener 

that meets the current UL325 safety standard. If you have a gate opener that is not listed 

with the current standard, please contact the GTO sales department for consultation on a 

gate opener that can meet your specific needs.

GTO 

Limited One Year Warranty

 

Gates That Open, LLC (GTO), gate openers and accessories are covered under warranty by the manufacturer against 
defects in materials and manufacturer workmanship for a period of one (1) year from date of purchase, provided the 
recommended installation procedures have been followed.

In the case of product failure due to defective material or manufacturer workmanship within the one (1) year warranty 
period, the product will be repaired or replaced (at the manufacturer’s option) at no charge to the customer, if returned 
freight prepaid to GTO, 3121 Hartsfield Road, Tallahassee, Florida, USA 32303. 

IMPORTANT: Call (800) 543-1236 

for a Return Goods Authorization (RGA) number before returning accessory to factory. Products received at the 
factory without an RGA number will not be accepted. Replacement or repaired parts are covered by this warranty for 
the remainder of the one (1) year warranty period or six (6) months, whichever is greater. GTO will pay the shipping 
charges (equal to United Parcel Service GROUND rate) for return to the owner of items repaired under warranty. 

The manufacturer will not be responsible for any charges or damages incurred in the removal of the defective parts 
for repair, or for the reinstallation of those parts after repair. This warranty shall be considered void if damage to the 
product(s) was due to improper installation or use, connection to an improper power source, or if damage was caused 
by electrical power surge or lightning, wind, fire, flood, insects or other natural agent.

After the one (1) year warranty period, GTO will make any necessary repairs for a nominal fee. Call GTO at (800) 543-
1236 for more information. This warranty gives you specific legal rights, and you may also have other rights which may 
vary from state to state. This warranty is in lieu of all other warranties, expressed or implied. 

NOTE:  Verification of the 

warranty period requires copies of receipts or other proof of purchase. Please retain these records.

Gates That Open, LLC

3121 Hartsfield Road • Tallahassee, Florida 32303

Sales:  1-800-543-GATE (4283) • Technical Support:  1-800-543-1236

www.gtoinc.com

Technical Support Hours:  MON–FRI, 8:00 a.m.–7:00 p.m. (ET)

800/543-1236 • 850/575-4144

Summary of Contents for FM130









Reviews: