No
. 96-1886-01E
Rev
.
1.1
GTECH Aircon Radio (Model GWT154)
PAGE
11
OF
72
Figure 6 – Example of the GWT154 Radio Module mounting to a Host/Carrier Board
3.5.2
Legacy
GTECH
Products
For existing or legacy GTECH products the Radio Module mounts to the Host Board and is enclosed
in a plastic housing, referred to as the Dongle. This Host board provides RS-485 and USB interface
connectors and an optional DC power connection. It uses two 10-pin receptacles to receive the Radio
Module.
The receptacles used on the Host Board are manufactured by Samtec, CUI Inc. and TYCO. Several
other manufacturers provide comparable mounting solutions; however, GTECH currently uses the
following receptacles:
Surface mount 10 Pin 2mm Single Row Receptacles
o
Samtec P/N: SMM-110-02-S-S (or equivalent)
Through hole 2.0mm DC Power Jack
o
CUI Inc. P/N: PJ-102A (or equivalent)
Surface-mount 5 Position Right Angle Mini B TYPE USB Jack
o
Samtec P/N: MUSBR-05-F-O-B-SM-A
Through-hole 9 Pin Right Angle Female DSUB Connector
o
TYCO P/N: 5747844-3
