ENGLISH
95
Adjusting the brake cable
The following instructions apply to the front and rear brakes. Both brakes must be checked and
adjusted correctly before riding. When each of the brake levers are pulled the surface of both brake
pads on either side of the wheel should push onto the wheel rim at the same time.
Using the Gtech tool, loosen the cable clamp
screw on the brake arm until the cable is free to
move through the clamp.
Unscrew the brake lever mount adjuster barrel
and locking ring as far as possible without the
adjuster barrel becoming detached from the
brake lever.
Tighten the cable clamp to secure the cable then
release the brake arms.
Squeeze the brake arms together so the brake
pads touch the wheel rim. Pull the end of the
cable through the clamp until it is tight. You may
need someone to help with this.
