ENGLISH
85
Place the eBike frame upright on a flat surface, you
may need to put something down on the surface
to stop your bike frame from getting scratched.
Make sure that the handlebar stem is sticking out
forwards and the brakes face the front. You can
adjust this by turning the front forks around.
Using the Gtech tool, carefully unscrew the
handlebar plate from the handlebar stem by
turning the screws anti-clockwise. Keep the 4
handlebar screws and washers safe – you will
need them later.
The brake levers should be horizontal and facing
away from the bike. The handlebars can be
rotated and adjusted to a comfortable position
if required.
Hold the handlebars in place at the centre of
the handlebar stem, making sure that they are
centred and the correct way round – the lines on
the centre of the handlebars will help you
do this.
Attaching the handlebars
Attaching the handlebars
