FST 75/150
260-2210-002 EN064
Page 24 / 37
Smoke and heat function RWA
The FST75/150 offers a special Input that reacts to the contact of a building’s automativ fire alarm system. In
case of fire it may be a benefit if the door opens automatically in case of a fire alarm, so an evacuation or the
free entrance of fire brigade is prepared. Doors may move in a position, that allow outlet of smoke and heat.
The smoke and heat command has the highest priority, that is to say, the movement to the
programmed position is executed in any way. All safety functions are overridden, exept emergency
stop!
This function has necessarily to be coordinated with the local fire brigade
The alarm contact has to be applied permanently. If the contact opens, the FST75/150 returns to normal
operation.
Retrieving information
9.1
Cycle counter (7-digit)
Selection
0..7 Upon pressing the adjusting knob, 7 digits will be displayed one
after another in the right-hand segment. By overlaying the
graduation lines in the left-hand segment, it is possible to see
how far the digit sequence has run. The first graduation line is
for digit 1, the second for digit 2 and so on. The digits written
one after another in the right-hand segment represent the
number of cycles as a figure. Example: 0003526 for 3526
cycles.
Press adjusting knob
9.2
Display of the last 2 errors
Selection
F..
Upon pressing the adjusting knob, the Number ical codes for the
last two errors which have occurred will be displayed alternately.
Press adjusting knob
9.3
Last configuration amendment
Selection
Upon pressing the adjusting knob, 7 digits will be displayed one
after another in the right-hand segment. By overlaying the
graduation lines in the left-hand segment, it is possible to see
how far the digit sequence has run. The first graduation line is
for digit 1, the second for digit 2 and so on. The digits written
one after another in the right-hand segment represent the cycle
number when the last program amendment was performed.
Press adjusting knob
9.4
Displaying the program version
Selection
The program version is displayed.
Press adjusting knob
