DrawingBoard IV 13
Selecting a Custom Setup
You can setup specific tablet options by turning different combinations of Configuration
keys ON or OFF. The available tablet options are listed below.
To set up the tablet:
1. Turn on Configuration Mode by clicking on the
Config/Exit
key.
2. Click on the
Bank
key where you need to work (A, B or C).
You can determine which bank you are in by placing the transducer over one
of the Bank keys. The Indicator light is on if the Bank is active.
3. Determine whether the
Configuration
keys are ON or OFF by placing the
transducer over each key. If the key is ON, the Indicator light is ON
4. Repeat steps 2 and 3 for the remaining Banks as required.
5. After you have completed your setup, save it by clicking on one of the
Save
keys.
6. Exit Configuration Mode by clicking on the
Config/Exit
key.
Summary of Contents for Drawingboard IV
Page 1: ...DrawingBoard IV 1 ...
Page 17: ...DrawingBoard IV 17 Setting up format ...
Page 22: ...DrawingBoard IV 22 ...
Page 23: ...DrawingBoard IV 23 ...
