Page 19
Installing Optional Modules
Fitting the Wi-Fi Module
CM-WIFI-M2-22
Wi-Fi Module Bus Connector
PCIe and USB connections to GT8 ‘JP4’
socket. Observe key-way when fitting.
Antenna Fixing
Press hooked side to
fabric on Terminal sides.
Wireless Antennae
Two antennae, one
for each stream. Both
antennae are duel band.
Antenna Connections
Push fit antenna connections
for each antenna.
1.
Position Wi-Fi module against
the JP4 socket (at a vertical
angle of approximately 45
degrees), observing key-way,
and gently push in.
2.
Secure Wif-Fi module with
screw supplied (do not over
tighten).
Tip:
You may need to press down
lightly on the module to make
fitting the securing screw easier.
3.
Applying light pressure,
attach antennae to the fabric
strips on the sides of the GT8
Terminal.
(The fabric strips are attached
during manufacture and are
not supplied separately.)
Securing Screw
JP4 Socket
Antenna Fixing
Press hooked side to
fabric on Terminal sides.
