•
Do not submerge this fixture in water or other liquids.
•
Do not use with extension cord near water or where water may
accumulate.
•
Keep light at least 16 feet from pools and spas. Keep plugs and
receptacles dry.
•
Suitable for Damp Locations only.
•
Avoid electrical shock by turning off or disconnecting from power
while moving or installing the unit.
•
When using product, basic precautions should always be followed.
•
Read and follow these instructions and observe all warnings.
•
Carefully read and understand the information given in this guide
before using this light. Failure to do so could lead to electrical shock,
fire, or other injuries which could be hazardous or even fatal.
•
Save this User Guide.
•
Do not use in areas with temperature higher than 104
°
Fahrenheit.
•
Do not use in areas near a gas source. This light is not for use in
potentially explosive environments. This is not a vapor proof light.
•
This light is not a toy and is not suitable for use by children.
•
Protect your eyes. Do not look directly at the LED lights for
extended periods of time.
•
Do not remove the lens protecting the LED. It is not possible to
change the LED light source. The LED chips are not replaceable.
•
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment.
•
Disassembling or modifying this unit will void the warranty.
GT-507R
4,000/2,000 Lumen LED Rechargeable Work Light with USB Port
GT-LITE WARRANTY: This product is guaranteed against
failure due to factory defects in materials or workmanship for
one (1) year from the date of purchase. This warranty is non-
transferable and applies only to the original owner. Proof of
purchase required for repair or replacement. Keep product
receipt with this User Guide and save in a dry location.
The warranty does not cover normal wear and tear of parts or
damage resulting from misuse of the product. Misuse of the
product includes but is not limited to: using in extreme weather
conditions, opening the housing of the product, or alterations to
the product.
