GST200 Intelligent Fire Alarm Control Panel
Installation and Operation Manual
The Intelligent Solution
Password Change
Setting password
Network Setup
Setting network address
Zone Start Number
Setting beginning number of zones
Customize
Outputs Setup
Default Outputs
Automatically starting
zonal sounders,
SOUNDER CIRCUIT
OUTPUT and F.P.E
OUTPUT in a fire
alarm condition.
C&E Outputs
starting zonal sounders,
SOUNDER CIRCUIT
OUTPUT and F.P.E
OUTPUT by C&E
equation in a fire alarm
condition.
Mute delay Mode
System sounders are not
allowed to be silenced within 3
minutes after the first fire
alarm.
Disable
Enable
Disable Password
No access password is required.
Disable
Page 51
Enable
Initialize System
System initialization
Device Debug
Viewing the supervisory value of addressable
devices.
ENTER
Confirming the input is valid. In monitoring state, press this key
to change time display between month/day and hour/minute
modes.
VIEW PLANT
Press this key to display action information when in
non-action mode.
START/STOP
[Operator password required]
Start Devices
Starting loop equipment. Device code should
be input when starting devices in loop mode.
Zone number should be inputted when start
all loop devices in zone mode.
Stop Devices
Stop loop equipment. In loop mode, input the
device code to stop it. In zone mode, input
the zone number to stop all devices of the
zone.
Summary of Contents for GST200
Page 1: ......
