35
• Menu
6.6.5 Disk Write Mode
–
Setup Hard Disk
6.6.6 System Information
–
Product information (
Version etc)
• S/W Version : Indicate Software Version of the Product
• H/W Version : Indicate Hardware Version of the Product
• Video Signal Type : Indicate Video Signal Type
• Disk Size : Indicate Hard Disk Capacity
• Number of HDD : Indicate Present Installed HDD No.
• IP Address
• MAC Address
6.6.7 Factory Default
–
Every Setup Initializing
• Press Enter to Start Initialize
• Showing Warning Message and Press OK to Run Initialize
• If do Factory Default, Every Setup is Initialized, but
1
Saving Image is Not Erase.
• Disk Overwrite : Overwrite Permission when
1
Hard Disk Full
O N: Overwrite Hard Disk from Oldest Data
OFF: When Hard Disk Full, Stop Recording and
1
Buzzer Activate (Refer to Menu 6.3 Buzzer Setup)
• Disk Initialize Now : Refreshment Hard Disk
All Recorded Data Deleted
• When Disk Initialize, Alarm Message Showing.
1
Select “Yes” to Start Initialize Disk.
※ When Change Disk Overwrite ON/OFF Mode, the Change will be Applied from Changing Time.
For Example When Overwrite On Mode & HDD Full, Change to Overwrite Off Mode and then it
will be Applied New Data. Fill HDD Full after Changing Time.
