- 30 -
SMCIP 401 ASI
• Repeat the procedure by the quantity of the digits to be set.
DiSEqC commands:
• In order to set a DiSEqC command, position the cursor under "off" using
button
>
.
• Using buttons
+/–
to select the desired control voltage.
"abc" are place-holders for the following setting options:
LNB
abc
A
9750 MHz
Place-holder Value
Description
a
_
No function
TA, TB
Sound burst satellite A/B
S01…16 Satellite (DiSEqC position)
b
H
Horizontal polarisation
V
Vertical polarisation
c
h
High-Band
l
Low-Band
Example:
S10Hh
means
S
atellite
10
(DiSEqC position 10),
H
orizontal
h
igh
—>
The control voltage only serves to control multiswitches and is not
suitable for power supply of upstreamed components (maximum
load 65mA).
—> GSS Multiswitches must be triggered by the following DiSEqC co-
mands:
Input group A —> DiSEqC command S01
Input group B —> DiSEqC command S02
Input group C —> DiSEqC command S03
Input group D —> DiSEqC command S04
Example: In order to trigger input group B for horizontal polarisa-
tion and high band
S02Hh
must be set.
• Press the
MODE
button.
—> The "Input symbol rate / DVB mode" submenu – "
SYMBOL
" is activated.