- 37 -
PTIM 1000
—> The factory defaults are invoked ("
FACTORY STORE
").
—> By pressing the
button, you will be returned to the menu
item "Selecting the channel strip"
without
invoking the factory de-
faults (page 26).
• Press the
button.
—> The factory defaults are saved. The display shows "STORE"
—> Back to "Selecting the cassette" (page 21).
—> By pressing the
button, you will be returned to the menu
item "Selecting the channel strip"
without
saving the factory defaults
(page 26).
—> If necessary set channel strip "
B
".
s
aving
set tings
• Press the
button.
—> Back to "Selecting the cassette" (page 21).
—> The settings are saved.
—> If functions of the TPS module are activated, their status is shown in
the second line of the display:
"
M
" – Station filter is switched on.
—> By pressing the
button, you will be returned to the menu
item "Selecting the channel strip"
without
saving the programmed
data (page 26).
—> If necessary set channel strip "
B
".
o
Per ation
with
a
Ca
module
In order for this function of the CA module to be possible, in the "Station
filter" – "
PROGRAM
" menu (page 31) services must be selected which can be
descrambled by the CA module you are using and your smart card.
Where both scrambled and unscrambled services are transmitted, short-term
picture loss may occur when switching between scrambled and unscrambled
services.
