- 26 -
PTIM 1000
—> Setting "
burst
"
The data packets of the user data are collected to a great data
packet in the transport stream.
• Press the
button.
—> The "Selecting the channel strip" – "
LINE
" menu is activated.
s
eleCting
the
Channel
striP
In this menu select the channel strip for which the following settings have to be
done.
Bx 4
Line A <=
LINE
=> Line B
• By pressing select channel strip "
A
" ("
Line A
") or select channel strip "
B
"
("
Line B
") by pressing the button.
—> The "Switching the IP address off or on, transmission protocol, port
number" – "
MODE / PORT
" menu is activated.
s
witChing
the
iP
address
off
or
on
t
r ansmission
ProtoCol
P
ort
number
In this menu you can switch off or on the output IP address of the channel strip,
and define the transmission protocol and the port number.
Bx 4A
on UDP
MODE/PORT
1234
Switching the IP address off or on
• Press the
buttons to switch "
off
" or "
on
" the output IP address of the
channel strip.
