GSS PSDP 6200, Assembly Instructions Manual

Page: 12 / 46

- 12 - - 12 -
5 Programming
5.1 Preparation
• Test the software versions of the head-end station and the cassette and update
them if necessary.
The current software versions can be found on the website ” www.gss.de ”.
• Connect the test receiver to the HF output or the test output of the head-end
station.
• Set the output channel / output frequency of the cassette (page 22) and adjust
the TV test receiver to this channel / this frequency.
• Switch on the modulator if necessary (page 20).
• Balance the output levels of the channel strips “
A ” and “ B ” if the difference in
level is
≥
1 dB (see chapter “Modulator settings / Adjusting the output levels
of the channel strips”, page 20).
5.2 Notes on the following programming procedure
– The parameters to be set are underlined (cursor).
– The flowchart in chapter 5.3.1 shows the programming procedure of channel
strip ” A ” without a CA module. This corresponds to channel strip ” B “ without
connection
C
/
F
.
– Connection
C
/
F
:
Channel strip ”
B
” – Decoding 2 stations with one CA module
– Connection
D
/
E
:
Channel strip ”
A
“ with a CA module.