GSS PSDP 6200, Assembly Instructions Manual

Page: 28 / 46

- 28 - - 28 -
Setting the audio mode
Setting audio output
In this menu you can define whether the
Mono
,
Stereo
or
Dual Tone signal from the MPEG data stream or the VPS Sig-
naling (if available) is to be used (“
mpeg
” … “
stereo”
).
In addition in this menu you can swap the languages for TV
channels with dual tone.
Setting the audio mode
• Press the
buttons to set the data stream
(““
mpeg
” … “
stereo”
).
Setting audio output
• Use
▶ ◀
/
to position the cursor under ” DUAL … ”.
• Press to swap languages (“
Dual normal
” /
“ Dual swap ”).
• Press the button.
—> The “Adjusting the picture format”, ”Switching teletext
mode off/on” – “
VIDEO
” menu is activated.
Adjusting the picture format
Switching teletext mode off/on
If problems with the automatic picture format switchover (e.g.
4:3, 16:9, Letterbox) arise with the connected devices, you can
switch “
off
” the Wide-Screen-Signaling (WSS) in this menu.
In addition in this menu you can define whether the teletext of
the channel set is transmitted or not.
Bx 4A
mpeg
AUDIO
DUAL norm
Å Ï
/
normal / swap
mpeg … stereo