- 7 -
PHDT 1000 H
2.4 d
esCriPtion
The double transmodulator cassette is a converter, which converts all stations
modulated according to DVB-S / DVB-S2 standard into two COFDM-modu-
lated signals according to DIN EN 300744 for feeding into a cable network.
DiSEqC
TM
* control commands can be output via the SAT inputs. The cassette has
two digital SAT IF inputs and one RF output. Additionally it is equipped with an
ASI input and an ASI output (ASI – Asynchronous Serial Interface acc. DIN EN
50083-9).
In addition, a CA module can be added to line A for descrambling scrambled
channels.
g
ener al
The control of the cassette takes place via the control unit of the head-end
station. After installation, some functions can be operated via UDP control
signals.
Two LEDs indicate if the respective channel strip is switched on (LED illumi-
nates) or off, and also provide an indication of the signal quality based on
their colour. Additionally the quality of the transport stream received is dis-
played ("
CN…
").
The RF output signals are sent through the RF output of the cassette to the output
collector. The common output level of the channel strips can be set at the output
collector. Additionally a transport stream is made available via the ASI output
dependent on the mode set.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "
V 45
"
or higher. You can find the current operating software for the control unit and
the cassette, the software "
BE-Flash
" and the current assembly instructions on
the website "
www.mygss.eu
".
The cassette is designed for use in head-end stations of the profi line.
