- 28 -
PHDT 1000 H
• Use the
buttons to place the cursor under the digit to be set for the
frequency display then use
to set the output frequency wished.
s
witChing
the
modul ator
off
or
on
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator of the channel strip using the
buttons.
—> The switched off modulator is indicated by "
- - -
" in the display.
—> The status LED is switched off (see also page 13).
• If the modulator is switched "
off
" use the
to switch it "
on
".
• Press the
button.
—> The next menu is activated.
a
djusting
the
outPut
levels
of
the
Channel
striPs
This menu item is used to set the output levels of the modulators
of the channel
strips "A" and "B" to the same value
.
Bx 4A
-3 dB
LEVEL
• Measure and note down the output level of the channel strip. To adjust the
output level to the output levels of the other cassettes please pay attention to
chapter 6 "Final procedures" (page 46).
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.
• Select the other channel strip (page 26) and set the following menu items:
• "Selecting channel / frequency setting" (page 26).
• "Setting the output channel" or "Setting the output frequency" (page 27).
• Switch on the modulator if necessary (page 28).
• Measure and note down the output level.
• Activate the "
LEVEL
" menu of the channel strip with the higher output level.
• By pressing
adjust the higher output level of one channel strip to the
lower output level of the other channel strip incrementally from "
0
" to "
–10
dB
".
