- 26 -
PADA 5100
q
uantit y
of
data
PaCkets
f
orward
error
CorreCtion
t
r ansmission
Channel
In this menu you set the quantity of the data packets to be transmitted, the
forward error correction FEC and the transmission channel. If the forward er-
ror correction is used additional redundant data are transmitted, so that the
addressee can correct transmission errors.
7
off
PKTS / FEC
Defining the quantity of data packets
• Using the
buttons define the quantity of MPEG data packets in one IP
data packet ("
1
" … "
7
").
—> Setting "
7
" results the smallest overhead.
Setting the forward error correction
• Press the button to position the cursor under "
off
" .
—> In position "
off
" the forward error correction (FEC) is switched off.
• Using the
buttons set the value of the desired FEC ("
off, 10/9
" …
"
20/19
").
7
10/09 AnnexB
PKTS / FEC
Setting the transmission channel
• Press the button to position the cursor under "
Annex…
".
• Use the
buttons to set the desired transmission channel ("
AnnexA
" /
"
AnnexB
").
• Press the
button.
—> You will be returned to the "Output parameters" – "
OUTPUT
" main menu
(page 21).
• Press the
button.
—> The "Input parameters" – "
INPUT
" main menu is activated.
