GSS HDTV 1000 ASI LAN, Assembly Instructions Manual

Page: 14 / 45

- 14 - HDTV 1000 ASI LAN / HDTV 1001 C
4 The control panel at a glance
4.1 Menu items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Input signal path
– Output signal path
– Channel strip
– Selecting channel / frequency setting
– Output channel / output frequency
– Output level
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– QAM modulation
– Stuffing
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
– Network/operator identification
– Deleting a PID
– Renaming a PID
– Factory reset
4.2 Control panel
The key pad on the head-end station is used to scroll through the menus and
menu items one at a time:
scrolls forward through the menus.
select parameters in the menus.
ÃiÌÊÛ>ÕiÃ]ʈ˜ˆÌˆ>ÌiÊ>V̈œ˜Ã°
selects sub-menus.
scrolls backward through the menus.
saves all entries
(in menu “DEFAULT” -> Factory reset).
BE-Remote
V41
please wait . . .