- 20 -
HDM 660 T
•
Press the button.
Selection Tuner A:
—> The "Station filter" – "
PROGRAM
" menu is activated (page 22).
—> Observe the "Transport stream / ORGNET-ID" – "
TS/ONID
" menu
Selection Tuner B:
—> The "LNB oscillator frequency" – "
LNB
"
menu is activated.
lnb
osCill ator
frequenCy
Set the oscillator frequency of the LNB used in this menu.
Bx 1A
10600 MHz
LNB
• Use the
buttons to position the cursor under the digit of the frequency
displayed.
• Press
to enter the respective digit of the oscillator frequency of the
LNB used.
• Repeat the procedure by the quantity of the digits to be set.
•
Press the button.
—> The "Input symbol rate" – "
SYMBOL
" menu is activated.
i
nput
symbol
r ate
The symbol rates of the satellite transponders can be found in the current trans-
ponder tables of the various satellite trade magazines or on the website of the
respective service provider.
Bx 1A
27500
SYMBOL
DVB-S
•
Use the
buttons to position the cursor under the digit of the symbol rate
displayed to be set.
• Press
to enter the respective digit of the desired symbol rate.
• Repeat the procedure by the quantity of the digits to be set.
