- 31 -
HDM 660 T
t
r ansport
strea m
/ orgnet id
If the stations of a transponder are split into the transport streams of the chan-
nel strips "
A
" and "
B
", one of the both transport streams a new identification
must be allocated to realise the channel search of the settop boxes connected
without mistakes.
If the ORGNET ID is changed a new NIT must be generated (page 31).
Bx 1A
0x0001,0100
TS/ONID
off
• Use the
buttons to position the cursor under the digit of the hexadeci-
buttons to position the cursor under the digit of the hexadeci-
mal number to be set.
•
Press
to set the respective digit of the hexadecimal number.
• Repeat the procedure by the quantity of the digits to be set.
• Using the
button place the cursor under "
off
" and switch "
on
" the trans-
mitter identification using the
buttons.
—> By pressing the
button you return to the hexadecimal number
setting.
• Press the
button.
—> The "Network Information Table" – "
NIT
" menu is activated.
n
et work
i
nfor m ation
t
able
(nit)
Bx 1A
off
NIT
=> Make
• To switch the NIT on or off ("
on
"/"
off
") press the
buttons.
• Press the
button to activate the NIT ("
Make
").
—>
All active cassettes which are able to output a NIT ("NIT cassettes")
must be set and ready for reception.
