Page 8 of 8
Model:
MPPT30HV
Operating Instructions
Please read these instructions before use
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
1800W Solar Battery Charger
Maximum Power Point Tracker
Q: Is interference possible? and If so what do I do?
GSL’s MPPTs produce far less interference than conventional solar regulator during
the absorption and float stages, that is during most of its operating time, and its
designed to comply with local and international EMI standards however some
interference is still possible. If interference occurs first try and reorient the aerial or move
the sensitive equipment away from the MPPT wires. Ensure the MPPT chassis is grounded.
Grounding a battery terminal (but only ground one point in cirucit do not ground both input and
output) may also help and finally you can try adding ferrite clamps.
MPPT30HV-R5
Visit our website
www.gsl.com.au
For our complete range of Products and Information
Warranty Conditions:
Our products come with guarantees that cannot be excluded under the Australian Consumer Law.
The customer is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage.
The customer is also entitled to have the products repaired or replaced if the products fail to be of acceptable quality and the
failure does not amount to a major failure.
GSL Electronics (GSL) warrants that its products will, under normal use and service, be free of defects in material and
workmanship for a period of two (2) years from the date of the original purchase by the customer as marked on the customer’s
original invoice.
Please refer to our website for full warranty and return information which can be found at http://www.gsl.com.au/faq.html