Page 5 of 8
Model:
MPPT30HV
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
Operating Instructions
Please read these instructions before use
1800W Solar Battery Charger
Maximum Power Point Tracker
Changing Battery Type Setting Procedure
1.
Ensure all the MPPT wires are disconnected.
2.
Remove 7 front panel screws and the front panel and slide out cover –
see Figure 1
.
3.
Locate connector J4 –
see Figure 1
.
4.
Shift link on J4 to desired position –
see Figure 2 , 3 or 4.
5.
Slide back cover and fit in front panel carefully, insuring led fits properly into housing,
and screw back the 7 mounting screws.
•
The above procedure can be repeated to change to a different mode.
Figure 1.
MPPT30HV-R5
