background image

 

Product Name:

 

Telecom Battery Box                                  Product Model:

 

GSL-P48100ESA1                              Rev No.: A0 

DATE: Aug 30, 2021 

 

   

12 

HV 

High voltage 

LV 

Low voltage 

OCV 

Open circuit voltage 

SOC 

State of charge 

8.

 

Product Warranty 

 

If you have purchased this product from our factory, you should be aware that this warranty is provided in 

addition to other rights and remedies held by a consumer at law.     

  You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and the failure does not amount to a major failure.   

  For the above mentioned products, you receive our factory warranty valid for 10 years from the date of 

delivery from factory. Factory warranty covers any costs for repair or spare parts during the agreed period 
beginning on the date of delivery of the device, subject to the following conditions.   

 

Factory Warranty Scope 

 

The factory warranty does not cover damages caused by following reasons:   
--Breaking the product seal (opening the casing)   
--Transport damage 
--Incorrect installation or commissioning   
--Failure to observe the user manual, quick installation instructions 
--Incorrect usage or inappropriate operation 
--Insufficient ventilation of the device 
--Failure to observe the applicable safety regulations 
--Force majeure   
Neither does it cover cosmetic defects which do not influence the energy production.   

 

Warranty conditions 

 

If the battery becomes defective during the agreed factory warranty period and, unless this should be 

impossible or disproportionate, one of the following options will be selected at the discretion of factory: 

--Battery repair or   
--Battery repair at on-site, or   
--Exchange for a replacement device of equivalent value with regard to model and age.   
In the latter case, the remainder of the warranty entitlement will be transferred to the replacement device 

and your entitlement will be documented at factory.   
 

Excessiveness in the meaning above exists in particular if the cost the measures for factor will be 

unreasonable.   

--In view of the value that the device would have without the defect 
--Taking in account of the significance of the defect, and   
--After consideration of alternative work around possibilities at factory customers could revert to without 

significant inconvenience.   

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for GSL-P48100ESA1

















Reviews: