4 x 5 Distributor Platform
40
PNEG-1295
16" - 36" Platforms
This assembly is designed to be located at any
elevation on trunking that’s needed to provide
access to other equipment. Determine eleva-
tion of platform surface and work from there.
Locate all parts required for assembly by using
the charts shown in the following figures.
Locate all parts to assemble clamps onto the
trunking. Measure the distance between the
clamps to assure proper location for support
channels and knee brace attachment. Attach
a clamp half and support clip on one end of the
4
Clamp Rod Weldment, 4x5
Platform
(DSP16005)
3
Clamp Band, 4x5
Platform
(DSP16002)
4
Clamp Rod Weldment, 4x5
Platform
(DSP16005)
2
Clamp Channel,
4x5 Platform
(DSP16001)
3
Clamp Band, 4x5
Platform
(DSP16002)
1
Clamp Clip
(GSB30144)
2
Clamp Channel,
4x5 Platform
(DSP16001)
1
Clamp Clip
(GSB30144)
Figure 32
Platform Clamps
support channel using 1/2" hardware. Next
attach the clamp rod weldment onto the clamp
half using 1/2" nuts. Next place this assembly
around trunk and attach other clamp half and
support clip using 1/2" hardware.
NOTE:
WHEN TIGHTENING CLAMPS ONTO
TRUNKING, DO NOT OVERTIGHTEN AND
COLLAPSE THE TRUNKING.
39"
39.5"