GSi PNEG-1295, Installation Manual, Page: 13 / 52

16" - 24" Platform Assembly
13 PNEG-1295 16" - 36" Platforms
RIGHT HAND DRIVE SETUP
LEFT HAND DRIVE SETUP
Place vertical posts in position as shown in
Figures 4-A & 4-B. Fasten with 3/8" x 1" bolts
and whiz nuts. Make sure not to tighten hard-
ware until assembly is complete. The three
1 Handrail Corner
Post
(HSP16021)
2 Handrail
Middle Post
(HSP16022)
1 Handrail Corner
Post
(HSP16021)
1 Handrail Corner
Post
(HSP16021)
Figure 4-A
Figure 4-B
1 Handrail Corner
Post
(HSP16021)
2 Handrail
Middle Post
(HSP16022)
1 Handrail Corner
Post
(HSP16021)
1 Handrail Corner
Post
(HSP16021)
Handrail Posts
middle posts sit on top of floor section on inside
of the toeboards. All the other angles fit on the
outside of the toeboards flush with the bottom
of the toeboards. See figures below.