(3) Fix the base plate of the video (4) Install the spherical housing on the
camera on the ceiling plate with base plate of the video camera
3 screws. according to the figure and then,
push the decoration ring up into
the slot.
1.3 Indoor boom installation
clamp screw
(1) Connect the installation base plate
A1
(A1) to the fixity with screw driver;
turn on the connecting tube (B2); and
then, turn tight the clamp screw and turn
B2
on the flange connecting sleeve (C3) and clamp
turn tight the clamp screw.
(2)
Connect the base plate of the spherical
C3
upward
device to the spherical flange with the 3
supplied screws according to the figure.
Note: all the wiring should reach at the
plane of the base plate after passing
through the flange. Connect the spherical
flange and (C3) with the supplied M5 screws
5
Summary of Contents for GS-PTZ-1010
Page 19: ...18...
