Outdoor suspension installation with power supply
(1) Connect the outdoor wall connection box
to the fixity with screws and connect the wall
support with hinges.
(2)Connect the wall support and the outdoor
spherical with the supplied M5 screws and wrench.
Note: all the wires should reach at the connection
box through the support.
(3)Plug all the plugs of all the wiring into the
corresponding sockets in the connection box.
(4)Close the box cover and tighten up the four
lock nuts.
(5) Disassemble transparent case with the supplied
wrench. Select the protocol and address codes and
install the transparent case.
Outdoor pole installation
Outdoor pole installation without power supply box
(1)Tighten the outdoor pole installation
pole to the fixity with screws. Connect the
wall support to the pole support with the four
supplied screws.
Note: all the wires should reach at the connection
place through the support.
(2)Connect the wall support and the outdoor
spherical with the supplied M5 screws
and wrench.
(3)Disassemble transparent case with the supplied
wrench. Select the protocol and address codes
10
Summary of Contents for GS-PTZ-1010
Page 19: ...18...
