![GSi CSA - Mod/F Installation Manual Download Page 9](http://html1.mh-extra.com/html/gsi/csa-mod-f/csa-mod-f_installation-manual_2274999009.webp)
1. Safety
PNEG-2123
Modular Tower Dryer Wiring Diagrams for CSA
9
Maintain Equipment and Work Area
•
Understand service procedures before doing work.
• Keep area clean and dry.
• Do not service equipment while it is operating. Disconnect and
lock-out power and fuel supply before entering equipment or
before performing maintenance.
•
Keep your equipment in proper working condition. Replace
worn or broken parts immediately.
•
Depressurize the fuel train before disassembling for service.
•
Allow the fan to operate for 20 minutes with the burner off to
purge products of combustion and to cool the components
before entering.
•
Check regularly for any developing gas plumbing leaks. Do not
operate the dryer if any gas leak is detected. Shut down and
repair before further operation.
ST-0030-2
Exercise Caution When Drying Flammable Grains
•
Be aware that some grains are highly flammable including but
not limited to rapeseed, canola, linseed, sunflower and milo.
• All grain and seed must be whole (minimal cracking or
crushing), clean and dust free before drying.
• Avoid dust and chaff from being drawn into the fan and heater.
• To reduce risk of fire, keep the fan, heater, drying plenum and
ducts clean at all times.
• In the event of a fire (or suspected fire):
1. Shut down the entire dryer.
2. Turn off fuel at the tank or supply valve.
3. Shut off and lock electrical power.
4. Evacuate the area.
5. Call the fire department.
ST-0032-1
Fall Hazard
•
Keep access door closed while on a platform to avoid falls.
• Always use proper personal protective equipment and proper
clothing when using equipment. Failure to follow safety
precautions can result in severe injury or death.
ST-0042-2