1. Safety
10
PNEG-2123
Modular Tower Dryer Wiring Diagrams for CSA
Maintain Equipment and Work Area
•
Equipment is intended for the use of grain drying only. Any
other use is a misuse of this equipment.
• The operating instructions in this manual pertain to the
common cereal grains as indicated. When drying any other
grain, contact GSI for additional recommendations.
• Be certain that capacities of auxiliary conveyors are matched
to dryer metering capacities.
•
On LP fired units, set pressure regulator to avoid excessive
gas pressure applied to the burner during ignition and
operation. Do not exceed maximum recommended
drying temperatures.
•
Equipment has sharp edges that can cause serious injury. To
avoid injury, handle sharp edges with caution and use proper
protective clothing and equipment at all times.
•
All guards must be in place before and during operation.
Images of guards removed in this manual are for illustration
purposes only.
•
Use caution when working around high-speed fans, gas
burners, augers and auxiliary conveyors which can start
automatically.
•
Keep hands, feet, and clothing away from moving parts.
•
Do not bypass any safety device or interlock.
•
Do not enter the dryer or bin while it is operating.
•
Do not operate in an area where combustible material will be
drawn into the dryer.
ST-0034-2
Stay Clear of Hoisted Equipment
•
Always use proper lifting or hoisting equipment when
assembling or disassembling equipment.
• Do not walk or stand under hoisted equipment.
• Always use sturdy and stable supports when needed for
installation. Not following these safety precautions creates
the risk of falling equipment, which can crush personnel and
cause serious injury or death.
ST-0047-1
