GSi AP Cumberland IR-Plus Feed Sensor, Installation And Operation Manual

Page: 8 / 26

8 PNEG-1945 IR Plus Feed Sensor
4. Delay Time
The “Delay Time” is adjustable inside the IR Plus Feed Sensor enclosure using a small pin jumper.
The “Delay Time” can be adjusted to 0 seconds or 30 seconds or 60 seconds or 90 seconds, depending
on the choice of the user. The factory default setting is 60 seconds. Place the pin jumper over the pins
next to the desired “Delay Time”.
(See Figure 4A.)
Figure 4A Delay Time Jumper