32
PNEG-1445 6", 8", 10", & 12" Custom Augers
4. ASSEMBLY
Outlet Cutting Guidelines
1. Before ordering, predetermine the location of the outlet drops. Make sure the outlet drops
do not interfere with the connecting band locations.
2. When an outlet opening is cut, that section of tube loses much of it’s strength therefore
additional support may be necessary.
3. If you have internal bearing flighting, outlets may be cut below internal bearings but a hole
must cut in the spout halfband allow access to internal hanger bearing.
4. We recommend removing flight before cutting the tube otherwise flight will be notched and/
or rough edges will occur. This may not significantly impact the performance of the auger,
but burrs and metal chips should be removed or abnormal wear will result. Also, grind down
any rough edges on tubing for a better fit and smoother operation.
5. Carefully measure your outlet before cutting. Follow the recommended guidelines as shown
below. It is very important that the opening be large enough not to reduce capacity, but
small enough so the outlet can be covered securely by the spout.
Figure 4AC
Summary of Contents for PNEG-1445
