5. Motor Assembly
24
PNEG-1204
Enclosed Belt Conveyor
Motor and Torque Arm II Reducer Installation
Reducer
1. To aid in the installation of the reducer onto the shaft, remove any protective coating film from the
2. Place key in the keyway on the drive shaft.
3. Attach inside bushing to the reducer drive.
4. Line up the keyway on reducer with key on shaft and slide the reducer drive onto the drive shaft.
5. Slide outside bushing onto shaft and attach to reducer drive. Once reducer drive is in place, fully
tighten both bushings. (
for more details.)
NOTE:
For more detailed motor mounting details specific to the installation, refer to the manual provided
with the motor.
Figure 5C
Figure 5D
B
D
C
A
A
C
D
Ref #
Description
A
Bushing
B
Key
C
Conveyor Drive Shaft
D
Shaft Mount Reducer
