GSI Group 890-00584, Installation And Configuration Manual

Page: 89 / 120

13
Maintenance
Topics Covered in this Chapter
▪ Inspecting and Cleaning the Controller
▪ Replacement Fuse Specifications
▪ Replacing a Fuse
▪ Replacing the Battery
Inspecting and Cleaning the Controller
Inspecting the controller and it units and keeping them clean can help prolong the proper functioning of the
controller.
Before You Begin
CAUTION
Disconnect supply before servicing or performing any maintenance operations.
CAUTION
Unplug the phone cord while installing or servicing the phone card.
WARNING
Lock the enclosure once the wiring is completed or when servicing. Use the included
nut and bolt or a padlock (not included) to lock the enclosure.
• Once a year, open and inspect the enclosures for moisture or dust build-up.
• Using a damp cloth, wipe clean the exterior of the enclosures.
WARNING
Do not spray water on the controller or on any of its modules.
Replacement Fuse Specifications
Replacement fuses are supplied with your system if ever the need occurs to change them. Two of each
model are available.
GSI Electronics part
number GSI Electronics part
description Refer-
ence Fuse recommended by the
manufacturer Recommended
fuse model
127–00031 Fuse 2.5A slowblow
5X20MM 250V F27-
F28 Bel Fuse 5HT 2.5-R
127–00032 Fuse 1A slowblow
5X20MM 250V F29-
F30
Bel Fuse
5HT 1-R
895-00677 Agri Alert 128 Touch 89