GSD Compuprint 9065 User Manual Download Page 79

Page: 79 / 128

User Manual 9065/9065plus

MAN10772-00 77

Paper Path Selection

This function defines the default paper path for the current macro. Paper Path selection depends upon the printer model
and the installed options.

SLASH ZERO NO

↑

PATH FRONT 1

→

←

PATH FRONT 2

→

←

↓

TEAR NORMAL

PATH FRONT 1

Paper loading with the Front1 push tractor (low position).

PATH FRONT 2

Paper loading with the Front2 push tractor (up position). This item is displayed only if the

Front2

push tractor option is installed.

Tear-Off Mode

PATH FRONT 1

↑

TEAR NORMAL

→

←

TEAR AUTOMATIC

→

←

LABEL

→

←

TEAR NO

→

←

↓

TEAR DELAY 1

TEAR NORMAL

The Tear-Off Function is performed pressing the TEAR key when the printer is offline.

TEAR AUTOMATIC

When the printer is not receiving any data, the paper is moved to the Tear-Off position.

It is returned to the Tear-Off position as soon as it receives printing data.

LABELS

This item must be set when printing on labels, in order to avoid paper jams.

The paper does not execute any backward movement. When pressing the PARK key, the
paper is ejected.

TEAR NO

The paper does not execute any backward movement.

See also “How to Use the Tear-Off Function ” and “How to Handle the Paper Parking ”

later in this chapter

Summary of Contents for Compuprint 9065

































































































































Search results

Summary of Contents for Compuprint 9065

Reviews:

Related manuals for Compuprint 9065

Brands by name

Popular brands

GSD Compuprint 9065, User Manual

Search results

Summary of Contents for Compuprint 9065

Reviews:

Related manuals for Compuprint 9065

Brands by name

Popular brands