GS GS602-A, Manual, Page: 7 / 38

9
http://www.GS Automatic.com/
Accidental entry into the manipulator action range or contact
with the
manipulator may cause personal injury. If you find an exception, press the
stop button immediately.
Emergency stop key is located on the right side of the
front of the GS 602-A manipulator electrical control box.
3. Notes
( 1) The following shall be checked in front of the GS Automatic arm and, if any,
repaired or other necessary measures shall be taken in a timely manner.
1) electrical cables are properly connected;
2) electrical cable skin damage;
3) the emergency stop switch is in the state of release;
4) arm movement is abnormal, abnormal noise.
(2) The owner and operator of the GS Automatic arm must be responsible for their
own safety. Ano robot reminds users to wear safety protection equipment and
comply with safety regulations when using manipulator products.
(3) Do not modify the mechanical arm
Do not rebuild the mechanical arm, due to unauthorized product
transformation caused by accidents or failures, not within the scope of our
warranty, the company is not responsible.
(4) Do not approach the running arm
Do not approach the running arm to prevent accidental injury or damage to the
arm.
(5) Please specify those responsible for oversight
In order to prevent manual adjustment errors or accidents caused by
inadequate safety confirmation, when more than two people operate, please specify
the supervisor.
( 6) Use the GS Automatic arm on the basis of an understanding of the "warning
sign" of the instruction manual for the use of the arm.
4. use of the environment