GS GS602-A, Manual, Page: 6 / 38

9
http://www.GS Automatic.com/
GS Automatic Arm Manual
2. hazardous matters
(1) In case of emergency, press the emergency stop button immediately, if the
brake arm can not be timely, it may cause personal injury or equipment damage
accident.
Stop button
(2) When the servo power supply is switched on after the emergency stop is
lifted, the emergency stop key should be started after the accident causing the
emergency stop.
Release from emergency
(3) When moving within the range of the manipulator, observe the following:
1) consider the strain scheme when the manipulator suddenly moves to its
position.
2) make sure to set up a shelter, just in case.
The mechanical arm action caused by misoperation may cause
personal injury
accident.
(4) Make sure that no one is within the range of the action of the manipulator and
that the operator is operating in a safe position when:
1)GS Automatic the arm is connected to the power supply.
2) use G code to operate the manipulator.
3) trial run time.
4) show again.
(5) Please do not move and maintain the arm while the arm is in operation. If you
want to move and maintain, please turn off the power of the arm before doing
this operation.