48
USB MENU SCREENS
USB Mode Unlocking
Enter correct code number to access the USB Menu.
Factory Default value is 10.
Read/Write To USB
Device
Select the required action from: Read Configuration File; Write Configuration
File; Write Recorder Log File. Read Profile Files; Write Profile Files.
Note: “Writing” is downloading from the Instrument to the USB stick.
“Reading” is uploading from the USB stick to the Instrument.
W
rite
Select Profile To
Write
If writing a profile to the USB memory stick, choose a profile to write from the
list provided.
Enter A File Name
Enter an 8-character file name if writing configurations or profiles. A file ex-
tension is automatically added to the end of file name (bct for configurations
or pfl for profiles).
Caution:
Existing files with the same name will be over-written.
Enter A Folder
Name
Recorder logs can contain multiple files. The user enters an 8-character folder
name for these logs. See the Data Recorder section
Note: To prevent existing recordings being over-written, an error message
is shown if the folder name entered already exists.
Writing Profile,
Configuration or
Log
An animated screen is shown the files are being written.
Caution:
Do not disconnect USB device until completed! Data loss
or corruption may result.
Transfer Successful
Confirmation that the data transfer to the USB stick completed correctly.
Press
to continue
Transfer Failure
For write failures, check for adequate disk space on the USB stick.
Read
Select File
Select the Configuration or Profile file to transfer from the USB stick.
Cau-
tion:
Configuration reads overwrite ALL of the instruments exist-
ing settings with new values.
Reading Profile or
Configuration File
An animated screen is shown while files are being read.
Caution:
Do not
remove the memory stick whist this operation is in progress. Data
corruption may result.
Transfer Successful
Confirmation that the data transfer from the USB stick completed correctly.
Press
to continue.
Transfer Failure
For read failures, check the maximum number of profiles and/or segments is
not being exceeded.
Summary of Contents for Chromalox 4081
Page 2: ...B ...
