manualshive.com logo in svg

GS Chromalox 4081, Installation & Operation Manual, Page: 38 / 236

Share
Download
GS Chromalox 4081 Installation & Operation Manual Download Page 38

30

Setup Wizard

An easy Setup Wizard runs automatically at first ever 

power-up. Follow the Wizard to setup parameters re-

quired for basic applications. The parameters covered 

by the Setup Wizard are marked with a 

w

 in the fol-

lowing sections covering the configuration mode sub-

menus. Once completed, the Setup Wizard exits to 

Operation Mode.
The Wizard can be run again at any time from the Main 

Menu. An option to reset all parameters to default (rec-

ommended) is offered when manually running the wiz-

ard.

Resetting defaults all parameters, not just 
those covered by the quick setup wizard. For 
more complex applications the user may have 
to reconfigure other Configuration Menu set-
tings before using the instrument.

Experts or users with more complex applications can 

select the parameters they wish to setup directly from 

the Configuration Menus bypassing the Wizard.

Manual entry to the Setup Wizard

To select the Setup Wizard from the Main Menu.

Hold down 

 and press 

 to enter the Main Menu.

Press 

 or 

 to select Setup Wizard.

Note: With the exception of the first ever power-up, 

entry into this mode is security-protected by the 

Setup Wizard Lock Code. Refer to the Lock Code 

Configuration sub-menu.

Press 

 to enter the Setup Wizard.

Navigating in the Setup Wizard

Press 

 to move forward, or 

 to move backwards 

through the screens.

Press 

 or 

 to change the value as required.

Holding down 

 or 

 for more than 1 second skips 

immediately to the next/previous screen accepting ALL 

values as shown.

Hold down 

 and press 

 to return to the Main Menu

Scrolling “Help Text” is shown at the bottom of the 

screens to aid navigation.

  SETUP WIZARD SCREENS

Setup Wizard

Unlocking

w

Enter correct code number to access Setup Wizard.

Factory Default value is 10.

Key Screens from

Configuration Menu

(those marked 

w

)

w

Press 

 to select each major configuration parameter in turn. Follow on-

screen prompts to alter the values.

Setup Wizard

Completed

w

Confirms completion of the Setup Wizard. Exits to Operation Mode.

Supervisor Mode

This mode is only available if it has been configured 

from the PC software. Its purpose is to allow selected 

operators access to a lock-code protected sub-set of 

the configuration parameters, without providing them 

with the higher level configuration menu unlock code.
The PC software can copy up to 50 parameters from 

configuration menus for inclusion in the supervisor 

mode screen sequence. If the parameter is normally 

displayed on screen with another parameter, both pa-

rameters will appear. It is not possible to configure su-

pervisor mode screens without using the software.

Entry into Supervisor Mode

Adjustments to these parameters should only 
be performed by personnel competent and au-
thorized to do so.

Supervisor Mode is entered from the Main Menu

Hold down 

 and press 

 to enter the Main Menu.

Press 

 or 

 to select Supervisor Mode

Note: Entry into this mode is security-protected by 

the Supervisor Mode Lock Code. Refer to the Lock 

Code Configuration sub-menu.

Summary of Contents for Chromalox 4081













































































































































































































































Reviews:

No comments