Grunluft VK-6010, User Manual

Page: 7 / 16

4
.
Using the appliance
4.1 Put the plug in the wall socket
All lights go on once and you hear a beep.Then the lights go out again.
4.2 Press the on/off button to switch on the appliance.
The power light and FAN SPEED 1 (lowest) light on the control panel .
Tips: the appliance is equiped with anion generator, when the appliance is
switched on, the anion generator starts working automatically.
4.3 AQ(Air Quality)
Built-in air quality sensor can detect air quality, after switching on the applicance,
it will show the quality of the air automatically throuth the different colors. Please
see the following information .
4.4 Filter replacement lights
There are total 4 filters as follows:
1
）
Pre-filter, we suggest you clean it every month.
Because it's washable, so it doesn't filter light.
2 ) Charcoal filter, we suggest you replace it every 3 months.
When the flash, you have to replace it.
3 ) Activated carbon filter, we suggest you replace it every
6 months. when flash,you have to replace it.
4) HEPA filter, we suggest you replace it every 6 months.
when flash, you have to replace HEPA filter.
05
AQ indiacator color Air quality level
Blue Good
Yellow Fair
Bad Red
AQ indiacator